Split system installation in Jandakot

Split system air conditioning for Jandakot homes

Jandakot doesn't have a single housing 'type', and that's the first thing we factor in. Plenty of homes sit on generous, semi-rural-style blocks where the meter box, the indoor head and the outdoor condenser can end up a long way apart. That means longer refrigerant line runs, more thought about where pipework is routed through eaves or wall cavities, and getting the gradient and drainage right so condensate clears properly. We size and plan each run on site rather than assuming a standard short-pipe job, because guessing in this area usually means an undersized or noisy result.

The other half of the picture is the more conventional brick-and-tile housing scattered through the suburb. A lot of these were built before whole-of-home air conditioning was standard, so the switchboard often needs a dedicated circuit added before a new unit can run safely. Because Otter Air & Electrical is dual-licensed for both air conditioning and electrical work, we handle that switchboard upgrade and the wiring in-house - you're not chasing a separate sparky to finish what the aircon installer started.

Typical jobs we see around Jandakot range from cooling a master bedroom and open-plan living area, through to multi-head systems for double-storey homes where the upstairs zones need their own quiet, well-placed heads. Replacing a tired, inefficient old unit is common too. Whatever the scenario, our air conditioning Jandakot work is matched to the room sizes, the block layout and the orientation, so the system is sized correctly and runs efficiently through Perth's hot, dry summers.