Installed cost · Large open-plan living/kitchen
7kW split system installed cost in Perth
$2,310 – $3,830 inc GST, supply & installed
The spread of the actual listed prices for every unit we install at this size, on a standard back-to-back install — value options at the bottom of the range, premium at the top. Every live price is in the table below.
The big singles start here: one wall unit covering a full open-plan living/kitchen zone around 45–50 m². At this size the install matters as much as the unit — airflow throw, wall position and the dedicated circuit all need to be right, and two-storey homes add access cost. Compare quotes on the whole job, not the box price.
Compare units
Every 6.8–7.3kW unit we install, side by side
Live supply-and-installed prices for a standard back-to-back install — the same numbers we quote from — with the specs that actually matter lined up so you can pick on the merits. Green marks the strongest figure in each row. Click any unit for its full page.
| Spec | Premium Panasonic RZ 7.1kW CS-RZ71AKRW | ★ Most popular Premium Panasonic Z 7.1kW CS-Z71AKRW | Premium Daikin Cora 7.1kW FTXV71WVMA | Premium Daikin Alira X 7.1kW FTXM71WVMA | Value Midea Athena 7kw specs on Athena page |
|---|---|---|---|---|---|
| Supply + installed | from $3,250best | from $3,490 | from $3,570 | from $3,900 | from $2,310 |
| Cooling | 7.1kW | 7.1kW | 7.1kW | 7.1kW | — |
| Heating | 8kW | 8kW | 8kW | 8kW | — |
| Cooling range | — | — | 2–8.9kW | 2–8.9kW | — |
| EER (cooling efficiency) | 3.43 | 3.43 | 3.68best | 3.55 | — |
| COP (heating efficiency) | 3.45 | 3.45 | 4.26best | 4.08 | — |
| Energy stars (cooling) | 3.5★* | 3.5★* | 3.5★ | 4★best | — |
| Quiet mode | Yes | Yes | 30 dB(A)best | 30 dB(A)best | — |
| Wi-Fi / app control | Optional adaptor | Built-in | Optional adaptor | Built-in | — |
| Air purification | Anti-bacterial filter | nanoe™ X (24/7) | Deodorising filter | Streamer (built-in) | — |
| Airflow | Adjustable louvres | AEROWINGS twin louvre | Coanda + Intelligent Eye | Coanda + Intelligent Eye | — |
| Dedicated circuit | Required | Required | Required | Required | — |
| Warranty | 5-year parts and compressor | 5-year parts and compressor | 5-year parts and labour | 5-year parts and labour | — |
"Best" marks the strongest figure in each row across these units. * average-zone rating; others are Perth's hot zone. Prices are live from our pricing system, supply and installed on a standard back-to-back install, inc GST.
What moves the price inside $2,310 – $3,830
The bottom of the range is a standard back-to-back install, which includes:
- The indoor head and outdoor unit, mounted, levelled, and secured
- Up to 3 metres of insulated refrigerant pipework in neat trunking
- The electrical work: a new dedicated circuit to the switchboard (2–3.5kW units and replacements connect to a suitable existing circuit), with an isolating switch at the outdoor unit
- Condensate drain run to ground level
- Standard outdoor mounting (blocks at ground level, or a wall bracket where specified)
- Vacuum, pressure test, and refrigerant charge to the manufacturer's spec
- Full run test, commissioning, remote demo, and the compliance paperwork
Long pipe runs, two-storey mounting, awkward access and brand tier lift it from there, plus the dedicated circuit every unit over 3.5kW needs. The full anatomy — with worked examples — is in our Perth split system cost guide, or try the cost calculator for your setup.
7kW split systems — common questions
How much does a 7kW split system cost installed in Perth?
$2,310 – $3,830 supply and installed (inc GST) for a premium-brand unit on a standard back-to-back install. The bottom of that range is an easy wall and a mid-tier premium unit; the top is a flagship unit or a more involved install. Our value-tier option (Midea Athena) comes in under it, and large-capacity units above it — the exact live prices for every unit are on this page, and every quote is fixed before work starts.
What size room does a 7kW split system suit?
45 to 50 m² — large open-plan living/kitchen. Insulation, ceiling height and window orientation shift the answer at the margins, which is why we confirm sizing at a free quote rather than guessing from floor area alone.
Does a 7kW split system need a dedicated circuit?
Yes — anything above 3.5kW needs its own circuit from the switchboard, and an older board can need work to take one. We're dual-licensed, so the circuit and any switchboard work are quoted and done by the same team on the same day.
Perth homeowners have trusted us for 10+ years. Here's what they say.
Real five-star reviews from Perth homeowners — see why locals choose Otter Air for air conditioning and electrical work.
See all reviews“Excellent Air Conditioning Installation Service! ⭐️⭐️⭐️⭐️⭐️ When looking to install 2 new aircons at my house, I was recommended to use Otter Air & Electrical and I couldn't be happier with the service provided by Matt and his assistant. From the initial enquiry through to the completion of the installation, the entire experience was seamless, professional and efficient. Matt responded promptly to emails, arrived exactly on time as scheduled, highly professional and the whole experience was stress-free. On the quote, he provided a few options with breakdown details of what is included in the price and makes it easier to make the decision. On the day of installation, the process was completed on schedule and I'm very happy with the quality of the work. They took great care to keep the work area clean and tidy throughout the job, and once finished, they thoroughly cleaned up, leaving everything spotless. Thank you very much, Matt and team and I would highly recommend this company to anyone looking for a reliable, professional and efficient aircon company.”
Get a fixed 7kW install price
We'll confirm the size actually suits your room, pick the right unit for the budget, and quote the whole job — install and electrical — in one fixed price.